JAWATAN KOSONG GURU

Maahad Tahfiz As-Sa'idiyyah , Seremban mempelawa kepada yang berkelayakan untuk mengisi jawatan berikut:

GURU AKADEMIK & GURU DINIYYAH
~ Warganegara Malaysia (Lelaki / Perempuan)
~ Berumur tidak kurang dari 18 tahun pada tahun 2009
~ Mempunyai sekurang-kurangnya Ijazah Sarjana Muda dari mana-mana IPTA/S dalam @ luar negara
~ Kepujian Bahasa Malaysia / Bahasa Melayu (termasuk lulus Ujian Lisan) pada peringkat Sijil Pelajaran Malaysia (SPM)
~ Keutamaan diberikan kepada guru perempuan yang boleh menjadi warden asrama perempuan
~ Antara subjek yang perlu diisi : Matematik, Bahasa Melayu, Bahasa Arab, Pendidikan Islam, Tauhid, Akhlak dan lain-lain subjek bergantung kepada kekosongan jawatan

GURU TAHFIZ AL-QURAN
~ Warganegara Malaysia atau bukan warganegara (Hafiz / Hafizah)
~ Berumur tidak kurang dari 18 tahun pada tahun 2009
~ Mempunyai sekurang-kurangnya Ijazah Sarjana Muda dari mana-mana IPTA/S dalam @ luar negara atau mana-mana kelulusan Tahfiz Al-Quran yang akan dinilai oleh pihak pentadbir yang menemuduga
~ Bagi Guru Perempuan : Keutamaan diberikan kepada yang boleh menjadi warden asrama perempuan
~ Waktu bekerja bagi Guru Tahfiz : 7.20 pagi - 12.30 tengahari & 7.00 malam - 9.00 malam.

* Calon-calon akan ditemuduga terlebih dahulu sebelum diterima bekerja di Maahad ini

Maklumat lanjut di http://www.saidiyyah.com/jawatan.html

Skim Latihan Pekerja Yang Diberhentikan

Kepada mereka yang diberhentikan kerja atau mengenali sesiapa yang diberhentikan kerja akibat kegawatan ekonomi boleh menyertai Skim Latihan Pekerja Yang Diberhentikan anjuran Pembangunan Sumber Manusia Berhad.

Skim latihan ini adalah percuma dengan beberapa syarat antaranya majikan mestilah berdaftar dengan PSMB dan pekerja diberhentikan bukan sebab disiplin dan sebagainya.

Untuk maklumat lanjut skim ini hubungi
WISMA PSMB
Jalan Beringin, Damansara Heights, 50490 Kuala Lumpur.
Tel : 03 - 2096 4800 Fak : 03 - 2096 4999
Laman web http://www.hrdnet.com.my

Menurut maklumat di laman web PSMB terdapat 2 Penyedia Latihan di N.Sembilan iaitu:

Itjaya Training Centre Sdn. Bhd
599b - 600 A/B, 1st Floor
Jalan Haruan 4/8
Oakland Commercial Centre
06-633 3933
06-633 3122
Program Ditawarkan :
Certificate In Computing Applications
Advance Certificate In Business English And Communication


Max-Human Capital Sdn Bhd
Lot 3983/7 & 3983/8
Jalan Haruan 1
Oakland Industrial Park
019-2309730
06-6334812
Program Ditawarkan :
Certificate In Entrepreneurship
Certificate In Business It
Sijil Dalam Asas Keusahawanan (Pengurusan Restoran Dan Kedai Makanan)

Program Sangkutan Dan Latihan Dikalangan Siswazah Menganggur Dan Program Khas Peningkatan Latihan Kemahiran Pekerja Diberhentikan
http://www.epu.jpm.my/Bi/prog_khas_siswazah/skim_programakhbar1.html

Kursus Pendawaian dan Hawa Dingin Percuma di N.Sembilan

Kursus 1 - Kursus Pemasangan Pendawaian Bangunan – 3 bulan
Kursus 2 - Penghawa Dingin & Ventilasi Mekanikal – 4 bulan

Hubungi Sdr Nazri Esa 012-6775537 / 013-3098875 ( Pendaftar Kursus , Senawang )

KEISTIMEWAAN
1. Kursus adalah percuma tajaan CIDB
2. Diiktiraf oleh CIDB dan Suruhanjaya Tenaga
3. Asrama disediakan
4. Berpeluang melanjutkan pelajaran ke Tahap PW1 ke PW4 dan Chargeman
5. Kandungan kursus 80% secara praktikal
6. Tawaran kad hijau serta perlindungan insuran 24 jam , t-shirt dan topi keselamatan adalah percuma
7. Tenaga pengajar yang berpengalaman dan berkualiti
8. Peluang pekerjaan dalam pebagai bidang industri
9. Peralatan amali dan peralatan pembelajaran ditaja oleh CIDB

Terbuka kepada semua lepasan SPM berumur 35 tahun ke bawah
Tempat terhad untuk setiap sessi
Yuran pendaftaran hanya RM 82

Tawaran Kursus Secara Percuma program tajaan CIDB (Construction Industry Development Board - Lembaga Pembangunan Industri Pembinaan www.cidb.gov.my )

SESSI PENGAJIAN

Kursus 1 - Kursus Pemasangan Pendawaian Bangunan – 3 bulan
TEMPOH PENGAJIAN PENDAFTARAN
Jan – Mac Dis
Apr – Jun Mac
Jul – Sep Jun
Okt – Dis Sep


Kursus 2 - Penghawa Dingin & Ventilasi Mekanikal – 4 bulan
TEMPOH PENGAJIAN PENDAFTARAN
Jan – Apr Dis
Mei – Ogo Apr
Sep – Dis Ogo

VACANCIES

We are a 100% owned Subsidiary of KIAN JOO CAN FACTORY, a KLSE Main-Board public-listed company, which major in packaging. We produce World-Class packaging products for domestic as well as export to Australia, China, Taiwan, Singapore, Thailand, Bangladesh, etc. In line with our continuous expansion plan, we are looking for capable and ambitious Malaysian to build a challenging career in the following positions in Nilai, Negeri Sembilan.

ELECTRICAL ENGINEER
Responsibilities:
•Responsible for ensuring the effectiveness & efficiency of electrical control.
•Analyses production related problems & decides upon the actions to be taken
•Advises on procurement of spare parts & materials.
•Coordinates in house project work across shifts.
•Liaise with supplier/contractor for any new engineering development, part fabrication & technical matters.

Requirements:
•Diploma/Degree in Electrical Engineering or any related field.
•Possess good problem solving & troubleshooting skills
•Possess knowledge in PLC
•Experience in engineering related field will be an added advantage


DESIGN ENGINEER
Responsibilities:
•Responsible for analyzing production related problems and decides upon the actions to be taken.
•Responsible for plans, coordinates & allocates priorities for the improvement projects to ensure its effective completion.
•Monitors the long-term effectiveness of the maintenance results are analyzed, requirements are defined and priorities are set.
•Coordinates in house project work across shifts by identifying problems, formulation solutions & taking action to resolve

Requirements:
•Degree in Mechanical Engineering or any related field.
•Possess good problem solving and troubleshooting skills


MECHANICAL ENGINEER
Responsibilities:
•Responsible for ensuring the effectiveness & efficiency of Preventive Miantenance Program.
•Analyses production related problems & decides upon the actions to be taken
•Advises on procurement of spare parts & materials.
•Coordinates in house project work across shifts.
•Liaise with supplier/contractor for any new engineering development, part fabrication & technical matters.

Requirements:
•Diploma/Degree in Mechanical Engineering
•Possess good problem solving & troubleshooting skills
•Experience in engineering related field will be an added advantage


PLANT & FACILITIES ENGINEER
Responsibilities:
•Responsible for ensuring all assigned tasks (work order) and repairing tasks are properly executed.
•Act as overall facility in-charge during day & night shift
•Upkeep facility equipment system efficiency & maintenability
•Conduct review on the daily activities and programs related to Facilties equipment operation and maintenance.
•Liaise with supplier/contractor for any new engineering development, part fabrication & technical matters.
Requirements:
•Diploma/Degree in Engineering or any related field.
•Possess good problem solving and analytical skills.
•Experience in manufacturing field will be an added advantage.


CTS EXECUTIVE
Responsibilities:
•Execute set marketing strategies to deliver sales targets.
•Required to carry out technical service where appropriate whereas technical training will be provided.
•Enhance and maintain good customer relations.

Requirements:
•Diploma/Degree in related fields. Candidates majoring in Science or Engineering will have an added advantage.
•Must have passion for sales, enjoy challenges & be prepared to go beyond limits & rise to all occasions.
•Possess good communication & presentation skills
•Possess own transport & willing to travel
•Experience in packaging, food & beverage or FMCG will be an added advantage.


HR EXECUTIVE
Responsibilities:
•Provides HR administrative functions in the areas of recruitment, training & development, people and performance management, compensation & benefit, counseling, disciplinary, social welfare as well as updating and maintenance of HR records.
•Ensure monthly payroll accuracy and on time process
•Strong coordination and arrangement for departmental function
•Monitoring & execute project and task from time to time

Requirements:
•Degree in Human Resources Management, Business Administration or any related field
•Good interpersonal skill & able to communicate to all levels of employees.
•Experience in training management will be an added advantage.


PRODUCTION EXECUTIVE
Responsibilities:
•Responsible for ensuring the daily production plan is smoothly executed.
•Analyses production related problems and decides upon the action to be taken.
•Monitors the long-term effectiveness of the maintenance results are analyzed, requirements are defined and priorities are set.
•Coordinates in house project work across shifts by identifying problems, formulation solutions & taking action to resolve

Requirements:
•Diploma/Degree in Science or Engineering or any related field.
•Possess good problem solving and analytical skills
•Experience in manufacturing field will be an added advantage

The SUCCESSFUL candidates will receive an attractive remuneration package, including contractual bonus and performance-based incentives

Please submit a comprehensive resume indicating your current and expected salary, telephone number together with the latest photograph to :-
Human Resources Department
KJM ALUMINIUM CAN SDN BHD
No. 106, Jalan Permata 1,
Kawasan Industri Arab Malaysian,
71800 Nilai, Negeri Sembilan.
Tel : 06-7998899 Fax : 06-7999097
Website : www.kjcf.net

Temporary Clerk

C-Pak Cergas Sdn Bhd is looking for a Temporary Clerk (Purchasing Dept) and requirement are as below:

Qualification:
SPM
Preferably with working experience
Contract period: 3~6 months
Age : 25 - 45

For further resume, info and inquiry, please contact :
Human Resource / Admin Dept
Lot 22, Lorong Bunga Tanjung 3/1,
Senawang Industrial Park,
70400 Seremban, N.S
606-6785630 (Ext:120)

Temporary Clerk

GOODMAID CHEMICALS CORPORATION SDN BHD (168884-H) has an immediate vacancy for a Temporary clerk as below:

Qualification:
SPM
Preferably with working experience
Contract period: 3~6 months

For further resume, info and inquiry, please contact :
Human Resource & Administration Manager
GOODMAID CHEMICALS CORPORATION SDN BHD (168884-H)
Lot 27B, Lorong Bunga Tanjung 3/1
Senawang Industrial Park
70400 Seremban
Tel : 06 - 677 1337
Fax : 06 - 677 1329

Temporary Clerk

NISSHO PRECISION (MALAYSIA) SDN BHD
Temporary Clerk (3 months)
Based in Senawang Industrial Park

Job Description:-
Accounts Dept
•Key in monthly transaction
Payment voucher
Petty cash voucher
Receipt voucher

•Payment bills
Cheque payment
Petty cash payment

•Filling

Job Requirements
Age : 22 to 26
Gender : Female
Qualification : Minimum SPM or Diploma with
credit in Mathematics
Experiences :Fresh
Transport : Own transport
Strong interpersonal & communication skills with all level
Computer literate :Excel, Words, PowerPoint
Have valid driving license and a competence driver.

Interested candidates please contact 06-6778322

Pembantu Pemasaran IT diperlukan di Seremban

Ingin Membina Kerjaya Di Bidang ICT ?

KUNTUM TEKNOLOGI Seremban membuka peluang kerjaya dalam bidang ICT

Kekosongan : 10 orang
Jawatan : Pembantu pemasaran
Pendapatan : RM 1000 sebulan
Kelayakan : Minima SPM dengan pengetahuan asas ICT
Walk-In Interview : Khamis 16 & 23 Okt 2008 , 11 pg hingga 3 ptg
Latihan disediakan pada Isnin 20 & 27 Okt 2008 , 10 pg hingga 5 ptg

Hubungi : 06-7643626 / 013-6367565
E-mel : admin@kuntum2u.com

Vacancy for the position of Account Assistance

POSITION TITLE
Account Assistant

PERSONAL SPECIFICATIONS
Certificate Qualification in accountancy or at least SPM level
Good organization skills and communication skills
Minimum 1 year working experience as account clerk / assistance
Immediate Intake ( Urgent ) ~ Female

For more information, please contact :
Department Manager
Human Resource Department
IWATSU (MALAYSIA) SDN BHD , Sg Gadut , Seremban
Tel no :06-6777611 ext 125

Tooling Design Engineer

PERSONAL SPECIFICATIONS
Degree or Diploma in Mechanical Engineering or a related discipline
Familiar with computer programs such as AutoCAD, Pro-Engineer, etc.
Minimum 2 years experience (Degree) or 3 years experience (Diploma) in fastener tooling design.
Have exploration of tool design, process design and fastener design.
Familiar with FMEA, SPC, APQP & PPAP activities and QS 9000 or TS 16949 quality standard.
Ability to communicate in a matrix environment with Think customer attitude.

DUTIES & RESPONSIBILITIES
Design and Preparation of technical drawings for process, Sales and tooling design.
Conducting & Managing first article meetings and co-ordinating until submission to customer.
Must be a team player under multicultural environment & ability to co-ordinate and drive things internally
Provide Technical support to production, quality and sales on technical issues related to products.
Understand the various technical standards relating to fastening systems
Preparation of Bill of material in the ERP system for new products.
Updating engineering changes (ECN) received from customers.

HR & Admin Manager
Acument Malaysia Sdn. Bhd.
Lot 63, Persiaran Bunga Tanjung 1,
Senawang Industrial Park, 70400,
Seremban, N.Sembilan , Malaysia .
Tel #: 606-676-7132
Fax #: 606-676-4503

Vacancies at Acument Malaysia Sdn. Bhd.

Acument Malaysia Sdn. Bhd. has the following vacancies:

1. Customer Service Coordinator
REPORTS TO Supply Chain Supervisor
SUPERVISORY SPAN Customer Service Assistants

PERSONAL SPECIFICATIONS
Diploma or Degree in any discipline
Good communication skills in English
Customer Focused with at least 2 years in a similar position
Experience in Microsoft and QAD preferred..

2. Product Design Engineer
REPORTS TO Engineering Manager
SUPERVISORY SPAN NIL

PERSONAL SPECIFICATIONS
Degree or Diploma in Mechanical Engineering or a related discipline
Familiar with computer programs such as AutoCAD, Pro-Engineer, etc.
Minimum 3 years experience (Degree) or 6 years experience (Diploma) in fastener tooling design and development for SDDB & Multiblow .
Have exploration of tool design, process design and fastener design.
Familiar with FMEA, SPC, APQP & PPAP activities and QS 9000 or TS 16949 quality standard.
Familiar with international fastener standard such as DIN,ISO,ANSI, JIS etc .
Familiar with Patents, Torx, Torxplus, REMINC, EJOT PT…etc.
Familiar with fastener tooling coding and part #.
Ability to communicate in a matrix environment with Think customer attitude.


HR & Admin Manager
Acument Malaysia Sdn. Bhd.
Lot 63, Persiaran Bunga Tanjung 1,
Senawang Industrial Park, 70400,
Seremban, N.Sembilan , Malaysia .
Tel #: 606-676-7132
Fax #: 606-676-4503

Vacancies at ON

ON Semiconductor, located in Senawang Industrial Estate has two vacancies available as below:

TECHNICAL BUYER
- Coordinate the efficient movement of materials with purchasing, production & engineering.
- Establish systems and procedures to ensure and enhance overall quality.
- Participate in Global pricing/contract negotiations and serve as the advocate for selective suppliers
- Manage supplier contracts (performance agreements, NDA, SMI contracts, terms & conditions)
- Ensure Supplier optimization (selection/reduction/standardization)
- Support operational teams on chronic supplier problems
- Conduct Industry market research/benchmarking
- Prepare Business interruption plans for ON and also each key supplier
- Aid sites/platform teams with value engineering programs
- Manage and develop strong supplier relationships in Supplier goal setting, Business reviews/general meetings, and Supplier performance rating process.
- Conduct supplier facility survey of potential critical components providers.
- Facilitate development of team/partner relationship with vendors/suppliers and maintain relationships for long term contracts for delivery of high quality parts.
- Monitor parts from acquisition through the manufacturing cycle and communicate/resolve supplier-related problems.

Requirements:
Possess a Degree in Science/Applied Science, Engineering or equivalent.
3-5 years experience in Semiconductor Assembly and Test operation.
Must have wafer fabrication experience


WAREHOUSE/ LOGISTIC - SECTION HEAD
Lead warehouse personnel in performing inventory control, shelf life monitoring and material scheduling/disbursement, maintain stock information, monitor daily material movement and actual production schedules versus inventory levels
Responsible for timely distributing of raw materials to manufacturing to ensure manufacturing cycle is not delayed
Implement policies and procedures to safeguard and preserve raw materials kept at the warehouse

Requirements:
Candidate must possess at least a Bachelor's Degree in Business Studies/Administration/Management or equivalent.
At least 3 year(s) of working experience in the related field is required for this position.
Applicants must be willing to work in Seremban.
Applicants should be Malaysian citizens or hold relevant residence status.

Contact Person
Sathiaseelan.M
Talent Acquisition,
ON Semiconductor
Lot 122, Senawang Industrial Estate,
70450 Senawang,
Negeri Sembilan.
DL:06-6711219
Fax:06-6774062

Vacancies at CSR

ELECTRICAL TECHNICIAN
Minimum Certificate or Diploma in Electrical Engineering.
Must possess AO Chargeman certificate.
Have basic PLC knowledge and able to work independently.
Able to troubleshoot problems in the electrical system.
Able to read electrical drawings well.
At least more than 3 years experience in an automated plant.

PURCHASING ASSISTANT
Minimum SPM with at least 3 years working experience in purchasing.
Experience in controlling raw material purchasing or similar field.
Able to communicate in English and Bahasa Malaysia
PC literate

TEMPORARY CLERK
Min SPM with at least 2 years experience in administration function.
Good knowledge of MS Office.
Fluent in both Bahasa Malaysia and English

FORKLIFT DRIVER
Minimum SRP with the ability to read and write in Bahasa Malaysia and English.
At least 2 years experience in handling forklift
Priority given to those who are able to handle a minimum 3.0 tonne forklift.

SECURITY GUARD
Minimum SRP qualification
Age between 32 – 45 years old.
Good health and non-smoker.
Preferable an ex-army personnel with at least 2 years experience in the security field.

All prospective candidates are invited to apply via e-mail at: alim@csr.com.my or contact Ms Audrey Lim at 06-6764205.

Vacancies at Acument for Clerical (contract) positions

Acument has vacancies for two clerical posts (contract basis for 6 months) in the Finance and CS Departments. Contract will start immediately. If the performance of candidate is good, the contract may be renewed year to year basis.

Contact :
HR & Admin Manager
Acument Malaysia Sdn. Bhd.
Lot 63, Persiaran Bunga Tanjung 1,
Senawang Industrial Park, 70400,
Seremban, N.Sembilan , Malaysia .
Tel #: 606-676-7132
Fax #: 606-676-4503

Vacancy

CUSTOMER SERVICE COORDINATOR

PERSONAL SPECIFICATIONS
- Diploma or Degree in any discipline
- Good communication skills in English
- Experience in Microsoft and QAD preferred..

DUTIES & RESPONSIBILITIES
- Responsible for the assigned customer in meeting customers satisfaction.
- To meet AOP target for sales of each customers.
- Responsible for handling customers request & feedback (quotation, product sample, compliant) arranging delivery, monitoring delivery status
- To manage feedback from customers in tactful, courteous and professional manner
- Responsible to keep Finished Goods inventory at the lower level and maintain the customer’s sales at the same time.
- Work closely with internal department such planning, manufacturing, QA & Engineering, Finance in order to fulfill customer satisfactions.

Contact :
HR & Admin Manager
Acument Malaysia Sdn. Bhd.
Lot 63, Persiaran Bunga Tanjung 1,
Senawang Industrial Park, 70400,
Seremban, N.Sembilan , Malaysia .
Tel #: 606-676-7132
Fax #: 606-676-4503

JAWATAN KOSONG

GOODMAID CHEMICALS CORPORATION SDN BHD

1. PENOLONG GUDANG (WAREHOUSE ASSISTANT)
Kelayakan Kerja
1. Lelaki berumur 20 tahun dan ke atas.
2. Memiliki sekurang-kurangnya sijil UPSR.

Skop Kerja
1. Menolong mengendali kerja dan aktiviti di gudang, seperti mengambil dan menyusun stok.
2. Menjalankan aktiviti kebersihan di gudang.


2. OPERATOR PENGELUARAN
Kelayakan Kerja
1. Calon mesti berumur 20 tahun dan ke atas.
2. Memiliki sekurang-kurangnya sijil SPM.
3. Calon yang memiliki sijil MLVK atau sijil kemahiran lain amat dialu-alukan.

Skop Kerja
1. Menjalankan tugasannya di Jabatan Pengeluaran.
2. Mengendali mesin dan kelengkapan yang ada di Jabatan Pengeluaran.
3. Penolong Raw Material (RM Assistant)

Kelayakan Kerja
1. Calon mesti berumur 20 tahun dan ke atas.
2. Memiliki sekurang-kurangnya sijil PMR.
3. Calon yang boleh membawa forklift amat dialu-alukan.

Skop Kerja
1. Mengurus dan menyusun bahan mentah dan bahan bungkusan.
2. Menimbang dan merekod bahan-bahan mentah.

Calon yang berminat boleh menghantar resume ke:
Jabatan Sumber Manusia & Pentadbiran
GOODMAID CHEMICALS CORPORATION SDN BHD
Lot 27B, Lorong Bunga Tanjung 3/1,
Senawang Industrial Park,
70400 Seremban.
Tel : 06 - 677 1337
Fax : 06 – 6771329

KEKOSONGAN JAWATAN

Sido Bangun (M) Sdn Bhd adalah sebuah kilang multinasional yang pakar dalam pembuatan beg polyethylene yang berkualiti tinggi. Kepada sesiapa yang berminat bolehlah memohon untuk jawatan kosong seperti yang tersebut di bawah:-

PENGAWAL KESELAMATAN ( Dalaman)
Kekosongan : Satu (1)

KELAYAKAN
Min. SRP/SPM
Umur antara 24 – 50 tahun
Pengalaman dalam bidang Keselamatan.
Keutamaan: Bekas Polis / Tentera / Pasukan berunifom
Rela bekerja dengan waktu yang panjang

GAJI KASAR (+ Elaun + Overtime ) RM 900.00

Hubungi PUAN RAHIZA / MASTURA di talian 06-6796700 samb 700

TEMUDUGA TERBUKA – SELASA ~ KHAMIS
JAM 9.00 a.m. ~ 11.30 a.m.
DI Sido Bangun (M) Sdn Bhd beralamat Lot 26, Persiaran Bunga Tanjung 1, Senawang Industrial Park, 70400 Seremban. N.S
Bawa bersama bila datang temuduga :-
Resume (CV) / Salinan K/P / Salinan Sijil Kelayakan & Persekolahan / Gambar saiz passport/lesen

KEKOSONGAN JAWATAN

Sido Bangun (M) Sdn Bhd adalah sebuah kilang multinasional yang pakar dalam pembuatan beg polyethylene yang berkualiti tinggi. Kepada sesiapa yang berminat bolehlah memohon untuk jawatan kosong seperti yang tersebut di bawah:-

TECHNICIAN Kekosongan : TIGA (3)

KELAYAKAN
Min. SPM / SPMV / mempunyai Sijil dalam bidang Mechanical / Electrical
Umur 18 ~35
Berpengalaman bekerja di kilang diberi keutamaan
RM 1350.00
Sanggup bekerja syif

GAJI KASAR (+ Elaun + Overtime )

Hubungi PUAN RAHIZA / MASTURA di talian 06-6796700 samb 700

Sila bawa bersama bila datang temuduga :-
Resume (CV) / Salinan K/P / Salinan Sijil Kelayakan & Persekolahan / Gambar saiz passport/lesen

DI Sido Bangun (M) Sdn Bhd beralamat Lot 26, Persiaran Bunga Tanjung 1, Senawang Industrial Park, 70400 Seremban. N.S

Karnival Pekerjaan

Tarikh : Sabtu-Ahad , 21-22 Jun 2008
Masa : 10 pg - 7 ptg
Tempat : Ruang Legar, Seremban Centre Point,Seremban

VACANCY

Iwatsu (M) Sdn Bhd is subsidiary of a multinational Iwatsu Electric Company Ltd (Japan). We are a leading manufacturer of key telephone systems and Oscilloscope looking for dynamic and dedicated Malaysians to fill the following vacancy :-

PROCESS ENGINEER
Department : PRODUCTION ENGINEERING
Posses a Degree / Diploma in Electrical / Electronic Engineering
Experience in manufacturing industry
Computer literate
Skills in process engineering will be an added advantage
Fresh Graduate applicants will be considered for “Junior Engineer” position.

PURCHASING OFFICER
Department : PURCHASING
Posses a Degree / Diploma in any field
At least two (2) years purchasing experience in Electronic Industry Sector
Excellent communication and interpersonal skills
Comfortable working under tight deadlines
Aggressive and able to work independently

IQC / QA SUPERVISOR
Department : QA
Posses a Diploma in Mechatronic or Electronic Engineering
At least two (2) years Incoming Quality Control experience in Electronic Industry Sector
Excellent communication with maker or vendor
Familiar with process audit and posses supervisory skill

Interested applicants are invited to submit their CV or resume together with a recent passport-sized photograph to :-

THE MANAGER
Human Resource Department
Iwatsu (Malaysia) Sdn Bhd
Kaw. Perusahaan Tuanku Jaafar
71450 Sungai Gadut Seremban Negeri Sembilan.
Tel : 06-6777611 Fax : 06-6777379
E-mail : noorhan@iwatsum.po.my

PRODUCTION SUPERVISOR

Sido Bangun (M) Sdn Bhd adalah sebuah kilang multinasional yang pakar dalam embuatan beg polyethylene yang berkualiti tinggi. Kepada sesiapa ang berminat bolehlah memohon untuk jawatan kosong eperti yang tersebut di bawah:-

PRODUCTION SUPERVISOR - Kekosongan : SATU (1)

KELAYAKAN
Min. Sijil Mechanical Engineering atau yang berkenaan
Umur antara 25 – 40 tahun
Min . 2 tahun pengalaman dalam bidang Industri
Mempunyai ciri ciri kepimpinan ( leadership skill) dan
penyeliaan ( supervisory skill)
Boleh mengendalikan komputer
Gaji Pokok : RM 1500.00

Hubungi Puan Rahiza / Pn Mastura di talian 06-6796700 samb 700
Temuduga Terbuka – Selasa ~ Khamis
JAM 9.00 a.m. ~ 11.30 a.m.
Di Sido Bangun (M) Sdn Bhd
Lot 26, Persiaran
Bunga Tanjung 1, Senawang Industrial Park, 70400
Seremban. N.S

Bawa bersama bila datang temuduga :-
Resume (CV) / Salinan K/P / Salinan Sijil Kelayakan & Persekolahan / Gambar saiz passport / lesen

HR Manager at Columbia Asia Medical Center

Human Resource Manager(Negeri Sembilan)

Requirements:
Degree in related field
Good knowledge of Malaysian Labour laws
Hands-on experience in full spectrum of HR Management
Self-motivated, pro-active and results-oriented
Possess excellent communications and interpersonal skills
Minimum 3 years experience in managerial capacity

Interested applicants are encouraged to apply online or submit full resume stating present and expected salary, contact telephone number to:The Human Resource ManagerCOLUMBIA ASIA SDN BHD (388359-P)Suite W306, West Tower, 3rd FloorWisma Consplant 1, No 2, Jalan SS16/447500 Subang Jaya, SelangorFax: 603 – 55215150

Email:careersmalaysia@columbiaasia.comFor more information about our company, please visit out website at: www.columbiaasia.com

HR Executive

Human Resources Executive (Negeri Sembilan - Senawang)

Responsibilities:
1. Responsible for the administration and execution of various human resources function with the main focus in compensation and benefits program, analyze data and information for business recommendation and decision making – constantly review, benchmark and analyze compensation and benefits against industry trend. 2.Assist in the administration of personnel transactions covering employees transfer, promotion, employment change status and separation.
3.Participate in the planning and implementation of all compensation and benefits related programs.
4. Support the overall planning and organizing of performance management, compensation and benefits review, salary review, bonus and other areas of human resources as and when required.
5. Review and update employee handbook as well as other policies and procedures to ensure consistency and fair application.

Requirements:
Degree in Business Administration / Human Resource Management or equivalent discipline preferably with few years working experience in compensation & benefits analysis, exposure in preparing proposals of various compensation & benefits related programs.
Good understanding of HR principles and employment legislations.
Ability to perform multiple tasks, determine priorities, meticulous and attention to details.
Ability to work independently in a fast-paced changing environment
Proficient in Microsoft Office applications especially Excel.
Demonstrates maturity, good analytical skills and ability to communicate (oral and written) effectively at all levels.

Interested applicants are invited to submit their resume. Please apply online or by post to:

The Human Resources ManagerXYRATEX (MALAYSIA) SDN. BHD.Lot 34 & 37, Persiaran Bunga Tanjung 1,Senawang Industrial Park,70400 Seremban, Negeri SembilanTel: 06-676 8000Fax: 06-679 5404Email:recruitment@malaysia.xyratex.com

Sanyu Jushi Sdn. Bhd.

Temporary A/C Asst. ( From Jun 08 to Aug 08) -1 position
Admin Asst.- preferably with Human Resources background - 1 position
Production operator (Male) - 1 position

Sanyu Jushi Sdn. Bhd.
Lot 64, Persiaran Bunga Tamjung 2,
Senawang Industrial Park,
70400 Seremban,
N.S.D.K.
Tel: 06-6787570 / 6787571
Fax: 06-6794711

Vacancy

Dou Yee Manufacturing Sdn Bhd is a manufacturing facility located in Senawang Industrial Park, Seremban , manufacturing a range of “High Tech” products for the semi-conductor industry. They are currently expanding their manufacturing capabilities and would like to invite suitable candidates to fill the following positions:

SKILLED MACHINIST
Minimum SPM qualification or equivalent and undergone training in machine shop engineering
Possess 2 to 3 years relevant working experience in operating or programming CNC machine
Able to work as a team and able to communicate with different level of staff

Interested candidates who meet the above requirements are invited to write-in/email with a complete resume to the following:

Dou Yee Manufacturing Sdn Bhd
Lot 59, Persiaran Bunga Tanjung 1
Senawang Industrial Park,
70400 Senawang, Seremban
Attn: Ms Wong
Email address: wongsc@douyee.com.my

(Only shortlisted candidates will be notified)

Engineer at Tan Chong Motor Assemblies

Tan Chong Motor Assemblies Sdh Bhd mempunyai jawatan kosong sebagai Engineer utk diisi. sesapa berminat atau ada adik bradik, pakcik, makcik sedara mara atau sahabat2 cource engineering boleh try. TCMA adalah syarikat yg memasang kereta Nissan di malaysia.

Jawatan : Engineer
Department : Localization Department

Prefer Mechanical, Automotive or Manufacturing.

sape berminat sila pass resume ke nurul-islam@ tcma.com. my
letak subject resume for engineer post.

Vacancies Senawang Laminating Technologies

Senawang Laminating Technologies Sdn Bhd specializes in the manufacture of niche flexible packaging products for the electronics, pharmaceutical, and medical markets. The company has grown steadily over the past seven years and looks forward to continued growth and capacity expansion. We are looking for high performing dynamic individuals with a proven track record that will be the future leaders of our organization.

1. Accountant (Negeri Sembilan - Senawang)

Requirements:
Professional Degree in Finance / Accounting
Minimum 3 years working experience in related field, preferably in manufacturing
Possess strong analytical skills and able to work independently
Good communication and interpersonal skills
Analysis and close monitoring of activities and performance of operations


2. Process Engineer

Requirements:

Strong analytical, technical, and statistical skills.
Minimum 3 years relevant experience for engineering positions.
Knowledge on blown film co-extrusion line or printing machine is preferred
Bachelor's Degree from an accredited university in engineering or other science major.
Must be fluent in English in addition to local languages.
Should you have candidates under KIV, friends or relatives with suitable qualification, please pass the resume of such candidate to Ms Nicole of Senawang Laminating. For inquiries please contact:

Nicole
Senawang Laminating Technologies Sdn Bhd
Lot 51, Persiaran Bunga Tanjung 1,
Senawang Industrial Park.
70400 Seremban, Negeri Sembilan.
Fax : 06-6779533
email: slt002@po.jaring.my

Kerjaya bidang IT di Seremban

Kepada yang berminat dan berpotensi
Peluang kerjaya di nexsIT
Jawatan tetap
Minima 2 tahun pengalaman ICT : PC & Network
Mempunyai kenderaan sendiri dan lesen B2, D
Boleh bekerja dibawah pengawasan minima
Bertanggungjawab mengetuai projek dan staf serta membuat perancangan
Sila hubungi Puan Nashwah 0176362814 . NEXSIT , No 18M, Bangunan Uda, Ampangan, Seremban http://www.nexsit.com

Vacancies at Iwatsu

Iwatsu (M) Sdn Bhd is subsidiary of a multinational Iwatsu Electric Company Ltd (Japan). We are a leading manufacturer of key telephone systems and Oscilloscope looking for dynamic and dedicated Malaysians to fill the following vacancy :-

PROCESS ENGINEER
Department : PRODUCTION ENGINEERING
Posses a Degree / Diploma in Electrical / Electronic Engineering
Experience in manufacturing industry
Computer literate
Skills in process engineering will be an added advantage
Fresh Graduate applicants will be considered for “Junior Engineer” position.

PURCHASING OFFICER
Department : PURCHASING
Posses a Degree / Diploma in any field
At least three (2) years purchasing experience in Electronic Industry Sector
Excellent communication and interpersonal skills
Comfortable working under tight deadlines
Aggressive and able to work independently

Interested applicants are invited to submit their CV or resume together with a recent passport-sized photograph to :-
THE MANAGER
Human Resource Department
Iwatsu (Malaysia) Sdn Bhd
Kaw. Perusahaan Tuanku Jaafar
71450 Sungai Gadut Seremban Negeri Sembilan.
Tel : 06-6777611 Fax : 06-6777379
E-mail : noorhan@iwatsum.po.my

INGRESS ENGINEERING SDN BHD

JAWATAN KOSONG (Operasi Nilai)

1. Penolong Pengurus – Jabatan PVD (Procurement & Vendor Development)
Kelayakan
-Mempunyai Ijazah/Diploma
-Berpengalaman dalam bidang Purchasing, Logistic dan Vendor Development
-Berdedikasi dan sanggup belajar

2- Eksekutif - Jabatan Pengurusan Kualiti
Kelayakan
• Mempunyai Ijazah/Diploma
• Berpengalaman sekurang-kurangnya 1 atau 2 tahun dalam dalam bidang QC
• Berdedikasi dan sanggup belajar

3- Pembantu Akaun - Jabatan Kewangan & Perakaunan ( Lelaki sahaja)
Kelayakan
• Diploma Perakaunan
• Berdedikasi dan sanggup belajar

4- Despatch/Pemandu (Lelaki sahaja)
Kelayakan
• Sijil Pelajaran Malaysia(SPM)
• Mempunyai lesen memandu Kelas B2 dan D
• Berdedikasi dan sanggup belajar

Sila hantar atau email CV anda ke alamat seperti berikut:-

Jabatan Pengurusan Sumber Manusia
Ingress Engineering Sdn Bhd
PT 2475-2476 Kaw. Perindustrian Nilai, 71807 Nilai Negeri Sembilan
Tel : 06 7995599 Fax : 06 7995598
(u.p : Pn. Kapisah Abdullah – kapisah@ingresscorp.com.my )

KEKOSONGAN JAWATAN

Sido Bangun (M) Sdn Bhd adalah sebuah kilang multinasional yang pakar dalam pembuatan beg polyethylene yang berkualiti tinggi. Kepada sesiapa yang berminat bolehlah memohon untuk jawatan kosong seperti yang tersebut di bawah:-

QC HEAD OF SHIFT Kekosongan : SATU (1)

KELAYAKAN
SPM dan keatas
Umur antara 25 – 40 tahun
Min 2 tahun pengalaman bekerja dibahagian QA/QC
Berpengalaman sebagai Penyelia diberi keutamaan
Mempunyai ciri ciri kepimpinan ( leadership skill)
Mahir mengendalikan sistem komputer
“Interpersonal & Communication Skill” yang bagus

GAJI KASAR + ELAUN + OVERTIME RM1400

**********************************************
PRODUCTION SUPERVISOR Kekosongan : DUA (2)

KELAYAKAN
Min. Sijil Mechanical Engineering atau yang berkenaan
Umur antara 25 – 40 tahun
Min . 2 tahun pengalaman dalam bidang Industri
Mempunyai ciri ciri kepimpinan ( leadership skill) dan penyeliaan ( supervisory skill)
Boleh mengendalikan komputer

GAJI POKOK RM 1500.00

Hubungi PUAN RAHIZA / PN MASTURA di talian 06-6796700 samb 700

TEMUDUGA TERBUKA – SELASA ~ KHAMIS
JAM 9.00 a.m. ~ 11.30 a.m.
Di Sido Bangun (M) Sdn Bhd beralamat Lot 26, Persiaran Bunga Tanjung 1, Senawang Industrial Park, 70400 Seremban. N.S
Bawa bersama bila datang temuduga :-
Resume (CV) / Salinan K/P / Salinan Sijil Kelayakan & Persekolahan / Gambar saiz passport / lesen